No matter the reason, getting a wood burning stove is a step in the direction of returning to your roots. In the past, there was no gas or oil which powered your homes. You had to rely on the fire produced by wood and kindling to provide heat and a source for your cooking. If you are a person who is interested in living like your ancestors, or like the look, a wood burning stove might be an ideal addition to your home. As a person interested in conservation, a wood burning stove is an ideal addition to your home. It provides a smoke free environment while giving off a clean source of heat and warmth. It is not an easy project when you decide to do wood burning stove installation, but it is one you are confident you can accomplish in your home.
Getting started
After you have decided to install a wood burning stove, you must consult your local ordinances to insure that you are legally able to install and use a wood burning stove. There are building codes, fire codes, and other rules and regulations that you must comply with when installing this particular type of appliance. In addition, there are safety guidelines and approved materials you must be familiar with before starting this project. There are manufacturer suggested instructions which should be followed whenever you are installing a wood burning stove.
The following are basic steps in the process that must be supplemented by the required distances, approved components and other materials as recommended by the governing authorities.
• Select a chimney: There are three normal choices when choosing a chimney to be used during your wood burning stove installation. All wood burning stoves must have a chimney. The stovepipe of the stove cannot be run through walls, floors, or the ceiling and must be attached to the chimney through a connector. Your choices are a properly lined masonry chimney, an Underwriters Laboratory approved stainless steel metal chimney, or a pre existing chimney with approved materials.
• The Stovepipe: This is a piece of metal used to connect the top of the stove to the metal or masonry chimney. This stovepipe cannot be run through walls, ceiling or flooring. It must be connected to the chimney directly. Be sure the piping is sufficiently placed away from any other combustible materials, including the walls and ceiling. You can use a single pipe, or a double pipe with insulation for added protection.
• Support the stove: As you choose a location in your home for the stove, you must reinforce the flooring with the proper base for the stove. The base of the wood burning stove must be made of non combustible material, like concrete. The base must extend beyond the diameter of the wood burning stove, including the width of the opening for the loading doors. In addition, the floor underneath the length of the stovepipe from the top of the stove to the chimney must also be made of non combustible material.
Source
 | |
|
Getting started
After you have decided to install a wood burning stove, you must consult your local ordinances to insure that you are legally able to install and use a wood burning stove. There are building codes, fire codes, and other rules and regulations that you must comply with when installing this particular type of appliance. In addition, there are safety guidelines and approved materials you must be familiar with before starting this project. There are manufacturer suggested instructions which should be followed whenever you are installing a wood burning stove.
The following are basic steps in the process that must be supplemented by the required distances, approved components and other materials as recommended by the governing authorities.
• Select a chimney: There are three normal choices when choosing a chimney to be used during your wood burning stove installation. All wood burning stoves must have a chimney. The stovepipe of the stove cannot be run through walls, floors, or the ceiling and must be attached to the chimney through a connector. Your choices are a properly lined masonry chimney, an Underwriters Laboratory approved stainless steel metal chimney, or a pre existing chimney with approved materials.
• The Stovepipe: This is a piece of metal used to connect the top of the stove to the metal or masonry chimney. This stovepipe cannot be run through walls, ceiling or flooring. It must be connected to the chimney directly. Be sure the piping is sufficiently placed away from any other combustible materials, including the walls and ceiling. You can use a single pipe, or a double pipe with insulation for added protection.
• Support the stove: As you choose a location in your home for the stove, you must reinforce the flooring with the proper base for the stove. The base of the wood burning stove must be made of non combustible material, like concrete. The base must extend beyond the diameter of the wood burning stove, including the width of the opening for the loading doors. In addition, the floor underneath the length of the stovepipe from the top of the stove to the chimney must also be made of non combustible material.
Source
No comments:
Post a Comment